Viton™ 氟橡膠
Key Features．Excellent heat-sealing performance: maintains reliable seals even at low temperatures o⋯
NT$0
Features．Peroxide-curable copolymer for enhanced durability and heat resistance.Applications．Special⋯
NT$0
Features．General-purpose grade with balanced processability and performance.Applications．Transmissio⋯
NT$0
Features．Low volume swell; excellent resistance to oils, greases, and fuel permeation.Applications．E⋯
NT$0
Features．Excellent dynamic fatigue resistance, suitable for high-stress environments.Applications．CV⋯
NT$0
Features．High-viscosity grade offering enhanced mechanical strength.Applications．High-strength gaske⋯
NT$0
Features．Peroxide-curing grade with excellent processability, suitable for complex shapes.Applicatio⋯
NT$0
Features．High heat resistance; suitable for continuous use at 175 °C.Applications．Turbocharger hoses⋯
NT$0
Features．High heat resistance and strong oil resistance; designed for high-temperature oil environme⋯
NT$0
Features．Modified grade with improved molding and extrusion performance.Applications．Complex-shaped ⋯
NT$0
Features．High viscosity with low volume swell; excellent resistance to oil-induced swelling.Applicat⋯
NT$0
Features．Intermediate viscosity grade, offering balanced processability and performance.Applications⋯
NT$0
Features．Low-temperature grade, capable of withstanding –41 °CApplications．Sealing gaskets for low-t⋯
NT$0
Features．Pre-mixed compound designed for compression molding; not suitable for steam vulcanization.A⋯
NT$0
Features．Pre-mixed compound designed for injection molding; not suitable for steam vulcanization.App⋯
NT$0
Features: Density ~0.885 g/cm³; melt flow index ~2.5 g/10 min; hardness approximately Shore A 84.App⋯
NT$0
Features: Density ~0.880 g/cm³; melt flow index ~0.8 g/10 min; hardness approximately Shore A 80.App⋯
NT$0
Features: Density ~0.874 g/cm³; melt flow index ~0.8 g/10 min; hardness approximately Shore A 65.App⋯
NT$0
Features: Low density (~0.865 g/cm³); high flowability (melt flow index ~5 g/10 min); free-flowing p⋯
NT$0
Features: Density ~0.862 g/cm³; melt flow index ~3.6 g/10 min.Applications: Suitable for TPO applica⋯
NT$0
Features: High impact efficiency; excellent low-temperature toughness; ultra-low density (~0.862 g/c⋯
NT$0
Features: Density ~0.902 g/cm³; melt index ~3; offers extremely high toughness and tensile strength.⋯
NT$0
Features: Density ~0.870 g/cm³; melt index of 5 (8100) and 30 (8107), providing significantly improv⋯
NT$0
Features: Falls within the medium-density range; slightly higher density than 8180 (~0.868 g/cm³); m⋯
NT$0
